Salifert Strontium Test Kit

Strontium plays an important role by accelerating coral and calcareous algae growth.

NSW contains approx. 7 – 9 mg/L strontium.

Since the growth of corals and calcareous algae goes hand in hand with strontium and calcium depletion, depletion of calcium usually means depletion of strontium as well.

It is advisable to maintain a strontium concentration between 5 and 20 mg/L.

Approx. 25 tests per kit. Measures in approx. 5 ppm increments

Strontium measurement is a necessity but is unfortunately a relatively difficult test. Perhaps in forthcoming years this will change when newer and easier methods for strontium measurement will become available.

It therefore is a test, which many hobbyists will not conduct frequent enough.

For that particular reason strontium additives should be designed in such a way that a too low or a too high strontium concentration is avoided.

With the Salifert Natural-Strontium additive we have reached this aim.

When used in combination with our Coral Calcium additive according to the instructions then the need for strontium measurement is greatly reduced and would have to be performed only once every few months.

Furthermore NSW contains strontium associated with sulfate. This form lacks the toxicity, the commonly used, strontium chloride has.

We therefore use predominantly strontium sulfate together with some other ingredients to avoid the occurrence of an ionic imbalance. It also makes it more effective and less toxic than strontium chloride.

The Salifert strontium test kit detects both ionically free and moderately complexed strontium. Salifert was the first to introduce a strontium test kit.