HOUYI Moss Glue (spray) easy to use glue by spraying

Product details:

• Volume : 600ml
• Weight: 450g
• Antibacterial rooting, strong adhesion
• Use for : Rain forest tanks, amphibious tanks (for adhesion of driftwood, bark, background boards and other moss)

Tips for using moss glue:

Spray a thin layer on the back of the moss and the substrate to be attached. Please be sure to press and fit each other after 1 minute. After use, spray it upside down for 3 seconds. Use your own gas to flush the nozzle. You can reuse it next time. Each bottle can be conservatively used for 1 square. The cleaner the back of the moss, the better the dry adhesion effect.

1. The adhesive substrate must be dry. The adhesive surface will affect the adhesion if moisture, grease, etc.
2. Do not stick it immediately after using the adhesive. (You can touch it with your fingers to feel the stickiness) 
3. This product contains flammable gas, and it should not be close to high temperature environment (above 48 degrees), fire and direct sunlight. 
4. Keep ventilation when using this product. If there is contact with the skin or eyes, please clean it up with water in time. If the discomfort persists, please consult a doctor in time 
5. Please keep out of reach of children to avoid accidents 
6. When the weather is cold, if the nozzle is blocked or there is no glue, just put the bottle in a container of 35 degrees hot water for 5 seconds (the glue will freeze or solidify when it is cold.